FAAC E145 Control Board

Control board for 230V swing gate operators

Discontinued product - please see the new E145S Control Board

Motor control
The board features a sophisticated electronic deceleration system and 5 relays for redundant motor control to drastically reduce possible malfunctions.

Operating logics
The E145 supplies more than 10 operating logics with customisable options, for installation that will meet any customer requirement..

USB port
Using a USB drive, you can update the board firmware, save/load the configuration and radio codes, and store them on PC/MAC. Therefore it is possible to copy the configurations from one installation to another and keep a copy of memorized transmitters, to avoid a manual memorization in case of board substitution.

Switching power supply
The energy effi cient switching power supply guarantees high immunity to interferences in mains power. The E145 also features an extended power
supply range (from 90VAC to 260VAC) and handles standby modes, thus further reducing consumption.

User display and interface
The digital display, the function LEDs and only three keys let you easily program the board and test its state at any time. Using the same keys, transmitters can also be quickly memorised.

Switching power supply
The energy effi cient switching power supply guarantees high immunity to interferences in mains power. The E145 also features an extended power
supply range (from 90VAC to 260VAC) and handles standby modes, thus further reducing consumption.

User display and interface
The digital display, the function LEDs and only three keys let you easily program the board and test its state at any time. Using the same keys, transmitters can also be quickly memorised.

BUS 2Easy
Using only two wires, the BUS 2Easy connector lets you easily connect many accessories, such as photocells (up to 16 pairs with polarised beam)
and the SAFEcoder.

Omnidec
The radio decoding circuit that can support the DS, RC, SLH and SLH LR technologies, is directly integrated on the board. It is therefore possible to memorise remote controls on the board itself, back them up and, with the E145, add or eliminate remotely.

Diagnostics and maintenance
The board is designed to facilitate maintenance and system troubleshooting. If present, an error code will be displayed indicating the possible cause of the problem to the installer. The E145 stores the events log, making it possible to trace the details of up to 350 (approx. 100 complete cycles).

Retrocompatibility
The new boards can be inserted in the current plastic boxes and the terminal strips are compatible with those of current FAAC boards. With the E145 it is possible to re-use the terminal strips of the board being replaced without the need to re-wire.

Download the updated E145 Quick Guide here