E034 Control Board
E034 Control Board
| Max power | 350W |
| Standby power | 4.4W ( data refers to the board supplied in the enclosure) |
| Standby power with XLC module | 0.5W |
| Standby power with XLC module and Simply Connect | 2W |
| Electric motor voltage max | 24 VDC |
| Max motor power | 340 W total (170W per motor) |
| Max accessories load | 24 VDC 250 mA Bus 2Easy 400mA |
| Model Variant | Part Number |
|---|---|
| E034 control board | 102011 |
A new control board with a completely revised advanced motor control.
The ability to adjust parameters to adapt automation to the needs of the installation (Speed, force, encoder sensitivity).
Facilitates regulatory compliance in terms of crushing.
The E034 is compatible with the optional new XLC module, designed to significantly reduce the energy consumption of the control board in standby.
In standby mode, energy consumption is reduced to a maximum of 0.5W for non-connected systems, while with Simply Connect, the maximum consumption is only 2W, in compliance with EU Directive 2009/125/EC and EU Regulation 2023/826
Bus 2easy Connector allows quick and easy connection of Photocells, Control devices, Radio control system for sensitive edges
Programmable Output available to interface the board with external devices according to installation needs
BUS 2Easy XIB Interface is required for the connection of hardwired safety devices, Adds an opening safety and a closing safety input to the board whilst still keeping full BUS functionality
The radio system is integrated and allows the installation of either the XF FDS module or the XF module (3 pin), enabling the storage of various types of FAAC transmitters (FDS, SLH, RC, DS).
New features
XLC - Connector for low consumption XLC (accessory)
Connectivity - Plug-in connectors for Simply Connect / XUSB
RADIO + Connector (3 pin) for FAAC XF FDS or XF radio module
